Máy làm mát chủ động
Net-Zero Cooling to Power Technology
Power generation and industrial processes generate considerable heat loads, requiring cooling systems to reject the heat. This is not only a waste of energy but consumes additional power leading to increased costs and emissions.
The Active Cooler converts the heat from engine cooling circuits into clean electricity while eliminating parasitic cooling loads. This leads the system to act as a net-zero cooling solution with the added benefit of power generation when conditions are optimal.
During peak cooling demand, the ORC expander is bypassed and the system prioritizes cooling, fulfilling cooling requirements regardless of power generation. This is the only time, other than initial startup, that the Active Cooler will consume power that is not its own.

// Weight: 4,800 kg (skid option)
// Dimensions: 2.4m x 9.5m x 1.75m (W*L*H)
*Loads larger than 800 kWth may require a custom design or secondary unit.
** Higher temperature heat sources require an additional heat exchanger.
// Provides full-load cooling for the engine.
// Generates up to 75 kWe (gross).
// Zero emissions or fossil fuel requirements.
// Increases efficiency by offsetting the cooling load.
// Modular, scalable system that can be adjusted to fit changing needs.
// Closed-loop system minimizes water consumption.
// Induction generator allows for simple electrical connection and start up.
// Reduces engine derate due to insufficient cooling.
// A simple and reliable baseload power supply in remote areas.
// Serves as a radiator / cooling tower alternative, offsetting capital costs.
// Easy installation with remote operation.
// Simple, robust design with minimal footprint.
// Short payback period (2 – 5 years).
// Qualifies for clean energy incentives.*
* Incentive eligibility varies based on region.
EXAMPLE APPLICATION 1.6 MW CAT 3530C
// Average Annual Temperature: 65°F
// 8,500 operating hours per year
// Hot Water Inlet: 230°F @ 220 gpm
// Radiator Demand: 10 kW
// Parasitic Cooling Load: 85 MWh per year
// Parasitic Cooling Cost: -$8,500 per year at $0.10/kWh
// AC800 Production: 570 MWh per year
// Newly Available Electricity: 655 MWh per year
// Total Savings: $65,500 per year at $0.10/kWh
// Total Savings: $98,250 per year at $0.15/kWh
// Efficiency Increase:4.8%
Good For The Environment
WHAT ONLY 5 ACTIVE COOLERS COULD DO FOR YOU…
By upcycling waste heat into usable power you generate 3,285 MW of clean electricity and offset the equivalent of 2,330 metric tons of carbon dioxide annually.
Your annual pollution offset is equal to taking 500 cars off the road, or reducing gasoline consumption by 260,000 gallons.
Your pollution offset is equivalent to the carbon sequestered by a 2,850 acre forest, or 100,000 mature trees.
The clean power generated is equivalent to the emission offset of 420 homes’ electricity use annually, or 95,000 cylinders of propane used for backyard barbeques.
Source: EPA Greenhouse Gas Equivalencies
*Calculations based on (5) Active Coolers generating 65 kW net and offsetting 10 kW each.
Good for business
Simple. Reliable. Profitable. Sustainable.
Simple
The simple and flexible nature of our ORC solutions allows them to be adjusted to fit the needs of any application. A robust, modular, and scalable design allows the system to be easily integrated into existing processes while allowing for future adjustments. Able to successfully operate at partial loads with varying conditions also means that they will produce electricity even when your processes are not at capacity.
Reliable
Every ElectraTherm product goes through a rigorous testing process at our world-class R&D test cell to ensure absolute reliability. With a global fleet of over 100 units clocking over 2,000,000 operating hours with 24/7 access to our team as well as dedicated partners, you can have peace of mind knowing that we confidently stand behind our products.
Profitable
Our systems use existing heat as fuel, keeping operating costs minimal. ElectraTherm converts this heat into clean electricity, ready immediately. The Active Cooler is a net-zero cooling to power solution that provides cooling as well as power – making the Active Cooler the perfect radiator alternative. This increases energy efficiency – up to 10% – while substantially reducing energy consumption. ElectraTherm’s ORC solutions may also qualify for local sustainability incentives as well as enabling micro-grid functionality in remote regions. With an impressive 20-year design life and a payback period of 2-3 years, the economics amount to an attractive return on investment.
Sustainable
Over 50% of energy used in power generation and industrial processes is lost as heat – making this heat an enormous source of renewable energy. Increasing energy efficiency by upcycling this waste heat into emission-free electricity is the single easiest way to mitigate emissions and achieve sustainability goals. Cooling to power means no more compromising efficiency or power output for cooling. Cooling to power means replacing a power-hungry radiator with a power-producing Active Cooler. Cooling to power means improving your bottom line and the environment.
Có câu hỏi nào không?
Hãy liên hệ với chúng tôi và chúng tôi sẽ sẵn lòng giúp đỡ.