Ko-produzierte Fluide, wie die Geothermie Öl und Gas nutzen könnte

There is a growing uneasiness in the oil and gas industry.

With the world eyeing ways to shift away from fossil fuels, an uncertain future is on the horizon for well operators. Attention is on what can turn profits now and how operations can take advantage of this new era of green energy. Powering an ORC system with co-produced fluids can increase efficiency and reduce costs, it may just be the cost-effective and simple solution operators are looking for.

The Problem

Along with the extraction of oil and gases comes hot water, this mixture is commonly known as co-produced fluids. This hot water is either pumped back into the ground to maintain well pressure or is removed, the two costing the oil and gas industry billions each year. Experts estimate that an average of 7 barrels of water are produced for every 1 barrel of oil. As wells age, they also tend to have significantly increased output ratios of hot water versus oil or gas, decreasing their economic viability. This hot water can be used as a geothermal heat source, providing renewable power. If there is such an abundance of hot water, why is there not infrastructure in place to take advantage of this resource?

The Solution

Co-produced fluids were, up until recently, considered a nuisance and uneconomical for power generation. This is because co-produced fluids are not at a high enough temperature to be used in traditional steam power production and the infrastructure required left a complex footprint. However, thanks to advancements in Organic Rankine Cycle (ORC) technology this low-temperature heat can now be utilized with heat to power systems such as the ElectraTherm Strom+ Generator oder Aktiver Kühler.

ElectraTherm’s ORC heat to power technology can utilize the thermal energy in fluid heat sources as low as 70°C and generate clean electricity, providing a baseload power supply or additional revenue stream. Our solutions are designed for remote operation, require minimal maintenance, and contain an advanced set of automatic controls that allow the system to power on/off as needed while running continuously at varying loads.

This opens opportunities across the oil and gas industry to…

// repurpose abandoned oil and gas infrastructure.

// extend the economic viability of existing oil and gas operations.

// provide emission-free electricity to offset energy costs or be sold to the grid.

// reduce greenhouse gas emissions.

// add renewable power to energy portfolio.

The Future

With the world favoring renewable energy and eyeing ways to shift away from fossil fuels – it is crucial the industry recognizes the immense potential under their feet. The best part about using co-produced fluids for power generation? While traditional geothermal energy production requires extensive drilling and infrastructure, the oil and gas industry already has access to their water source, significantly offsetting capital costs. With ElectraTherm, operators can benefit from a baseload power supply that improves their bottom line and is both mobile and scalable, allowing for future implementation.

 

Um mehr zu erfahren und zu sehen, ob die Produkte von ElectraTherm für Sie geeignet sind, besuchen Sie unsere product pages oder Kontaktieren Sie uns. To stay up to date with ElectraTherm and the latest waste heat news, subscribe to our newsletter hier.

Über ElectraTherm
ElectraTherm von der BITZER Gruppe bietet erstklassige Lösungen zur Abwärmerückgewinnung, die den Organic Rankine Cycle zusammen mit proprietären Technologien nutzen, um Niedertemperaturwärme in sauberen Strom umzuwandeln. Die einfachen und effektiven Lösungen von ElectraTherm erzeugen sauberen Strom, steigern die Effizienz, senken die Energiekosten und reduzieren die Emissionen - ohne zusätzlichen Brennstoffverbrauch. ElectraTherm hat mehr als 100 ORC-Anlagen in über 13 Länder geliefert und mehr als 2.000.000 Betriebsstunden geleistet und ist damit weltweit führend im Bereich der Abwärmerückgewinnung im kleinen Maßstab.

The combined advantage of ElectraTherm’s engineering along with the value of being supported by BITZER, the world’s largest independent manufacturer of refrigeration compressors which boasts close to 3,500 global employees and average annual sales approaching $1 billion, allows the ElectraTherm team to dedicate their energy to the advancement of waste heat recovery technology in the marketplace.

ElectraTherms Strom+ Generator is a heat to power generator, converting waste heat into clean electricity and usable thermal while offsetting the cooling load. The Aktiver Kühler acts as a cooling to power generator, using the same cycle to provide self-powered cooling while generating electricity. Both of ElectraTherm’s solutions reduce emissions and energy costs while providing a baseload power / cooling supply. Taking advantage of waste heat is not only profitable, but practical. Allowing companies to benefit from a more circular economy while achieving sustainability goals.

Um mehr über ElectraTherm zu erfahren, hier klicken.