Biomass in Oregon

ElectraTherm Power+ Generators Generate Electricity from Wood Waste at Mill in Oregon

ElectraTherm commissioned two Power+ Generators at an integrated wood products mill in Wallowa, Oregon. The machines operate off the waste heat of a biomass boiler to generate emission-free electricity.

Integrated Biomass Resources (IBR) processes small-diameter timber into various wood products, such as firewood and fence posts. Wallowa Resources Community Solutions, Inc. (WRCSI) purchased and installed the first Power+ at the Wallowa mill in December 2012. The site uses residuals from its wood products to fuel a Uniconfort dual stage gasification boiler, creating hot water for process heat used for drying. The excess heat in the form of hot water is used to fuel the two Power+ Generators for onsite power generation. Since the commissioning of the second machine in July, both Power+ Generators now operate in tandem with the biomass boiler. The boiler sends hot water to the Power+ Generators at 205°F, which generates a combined output of more than 65 kWe net for the site. The added electrical generation capacity allows IBR to offset a greater portion of the electrical demand at the mill, which displaces the retail cost of power for significant savings. Future plans to increase efficiency include recovering the heat not utilized by the Power+ Generators for additional drying use.

“The Power+ was easy to incorporate into our system and the installation and commissioning process went smoothly,” said Matt King, Renewable Energy Program Coordinator, WRCSI. “ElectraTherm provided strong support during the commissioning process and initial start-up phase.”

Each Power+ 4400, ElectraTherm’s standard Organic Rankine Cycle (ORC) generator with electrical output up to 65kWe per machine, feeds off the hot water from the boiler to generate green energy from heat that would otherwise go to waste. Hot water enters the Power+ Generators at up 240° F, where it heats a working fluid into pressurized vapor. As the vapor expands, it drives ElectraTherm’s patented twin screw power block, which spins an electric generator and produces power.

Find out how much additional power your Biomass site can generate.

Contact us for a free Project Assessment.